| |
|
| |
MODEL: CPAVPF Vacuum Powder Filling Machine |
| |
| |
|
| |
TECHNICAL SPECIFICATION |
| |
|
| |
|
| |
NOTE: Automatic, Semi automatic table top model also available, with sized filling volumes, best for precise and compressed powder fill. |
| |
| |
| OPERATION |
Automatic Vacuum Powder Filling machine is a compact model used for filling of Powder in to Bottles / containers, The incoming dry container sterilized are fed through the in feed Un-scrambler and suitably guided on the moving S. S. / delrin flat conveyor belt at the required speed of the correct placement below powder wheel.
The powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one.
The filled container is immediately separated on the conveyor by vial separator and moves further for operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing systems).
|
|
|
| |
|
|
|
|
